SKI TRANSPORT SYSTEMS
Low space requirement through compact structure
Simple operation, since no conversion is needed for other types, lengths or widths.
Link to the machine program achieving a complete unit
Control panel at the feed and removal zones with all the important control functions
Low staffing requirement, because the charge can be filled and the finished ski can be extracted during processing.
Quick adaption for extensions by modular design
Run through procedure BNP-ANP-SKI
The ski is delivered to the machine, and placed on the extraction station in a fully automatic process.
Circular procedure TBRE-SKI
A circular transport system ensures a fully automated transport of the ski through the two machines until the required sanding/grinding operations have been carried out.
Charging conveyor with 3 lines in cyclic operation
Extraction conveyor with 2 lines in cyclic operation
Circular system with indexing conveyor and return belts
Insertion and extraction station for accepting up to 10 skis
The control unit is built into the control cabinet of the sander/grinder
Secured at the sides by safety fences
|Length||1,200 - 2,100 mm, optionally: 900 - 2,100 mm|
|Width||60 - 150 mm|
|Tip height||25 - 80 mm|
|Tails||standard 10 - 80 mm, outside dimensions depending on execution|
|Transport system feed|
|Feeding speed||fixed 12 m/min, optionally: stepless|
|Input voltage||400 V/50 Hz|
|Compressed air||connection 1", 7 bar constant|
|Option||ski turn-over system|
Specifications subject to change