DEUTSCH   |   HOME  |  CONTACT FORM  |  IMPRESSUM  |  PRESS  |  SITEMAP  |  LOGIN
facebook twitter linkedin instagram pinterest blogspot youtube xing wikipedia karriere.at
< back SPORT / COMPOSITES / SKI / SIDE SANDING
Detail side sanding with 2 x 2 sanding pads

SIDE SANDING WITH 2 X 2 SANDING PADS

YOUR ADVANTAGES

High flexibility through use for rough sanding, final sanding and scotching of the sides of the ski

Double performance sanding connection of two sanding units in sequence permits two machining operations in a very confined space. Optimum adjustment of sanding belts, feed, sanding speed and the sanding pressure ensure optimum sanding efficiency

Short set-up times since no manual change-over to other types, lengths or widths is required

Optimising the sanding belt it can be adjusted to required process quickly and safely using the built-in sander equipment

THE PRINCIPLE

Run-through procedure
The ski is fully automatical transported through the machine with the tip or tail ahead.

Features
Pneumatic sanding pressure, each pair of aggregates separately adjustable, Optionally: Electronic sanding pressure for 3, 5 or 7 effective ranges
Sanding belt oscillation for optimal exploitation of the sanding belt
Special contact shoes for an optimal sanding result
Angle adjustment for all aggregates, stepless adjustment 0 - 6°
Both sanding belts and scotching belts can be used
Feed with feed rollers from above and below
PLC control with clearly laid out operating unit built into the control cabinet

Machining program
In this program, all important data for machining the respective type of ski can be put together and stored as required.

TECHNICAL DATA

Ski
Length/Width900 - 2,200 mm/60 - 150 mm
Tip height25 - 80 mm
Tailsstandard, optionally: 10 - 80 mm flexed
Machine
Feed drive top/bottom6 x 0.37 kW/3 x 0.37 kW
Feed speedfixed 12 m/min, optionally: stepless
Drive sanding units4 x 3.3/4.5 kW pole-changing
Sanding belt dimensions100 x 2,200 mm
Drive oscillation4 x 0.18 kW
Connections
Input voltage400 V/50 Hz
Total power consumptionapprox. 24 kW (without options)
Compressed airconnection 3/4", 7 bar constant
Cooling water connection 1", pressure 5 bar
Cooling water outletwidth 220 mm, outlet height 540 mm
Wet extractionconnection diam. 200 mm
Optionssanding speed stepless by program
motor-driven angle adjustment
control-panel operation
viewing-window rinsing

Specifications subject to change