DEUTSCH   |   HOME  |  CONTACT FORM  |  IMPRESSUM  |  PRESS  |  SITEMAP  |  LOGIN
facebook twitter linkedin instagram pinterest blogspot youtube xing wikipedia karriere.at
< back SPORT / COMPOSITES / SKI / SIDE SANDING
Prinzip Seitenschleifen mit 2 Schleifschuhen

SIDE SANDING WITH 2 SANDING PADS

THE ADVANTAGES

High flexibility through use for rough sanding, final sanding and scotching of the sides

Maximum sanding performance
through optimal coordination of sanding belts, feeding, sanding speed and sanding pressure

Short set-up times
since no manual change-over to other types, lengths or widths is required

Machine material feeding
either manual or fully automatic

Optimising the sanding belt it can be adjusted to required process quickly and safely using the built-in sander equipment

THE PRINCIPLE

Run-through procedure
A feed system ensures a fully automated transport of the ski through the entire machine, with either the tip or the tail pointing forwards.

Features
Pneumatic sanding pressure, Optionally: Electronic sanding pressure for 5 or 7 effective ranges
Sanding belt oscillates for optimal exploitation of the sanding belt
Special sanding pads for optimal sanding result
Stepless angle adjustment at any aggregate 0 - 6°
Both sanding belts and scotching belts can be used
Feed with feed rollers from above and below
PLC control with clearly laid out operating unit built into the control cabinet

Machining program
In this program, all important data for machining the respective type of ski can be put together and stored as required.

TECHNICAL DATA

Ski
Length/Width900 - 2,200 mm/60 - 150 mm
Tip height25 - 80 mm
Tailsstandard, optionally: 10 - 80 mm flexed
Machine
Drive feed top/bottom4 x 0.37 kW/3 x 0.37 kW
Feed speedfixed 12 m/min, optionally: stepless
Sanding units
Drive2 x 3.3/4.5 kW, pole-changing
Optionsanding speed stepless via the program
Sanding belt dimensions100 x 2,000 mm
Connections
Input voltage400 V/50 Hz
Total power consumptionapprox. 13 kW (without options)
Compressed airconnection 3/4", 7 bar constant
Cooling waterconnection 1", pressure 5 bar
Cooling water outletwidth 220 mm, outlet height 540 mm
Wet extractionconnection diam. 200 mm
Optionsmotor-driven angle adjustment, control-panel operation, window rinsing

Specifications subject to change