UNIVERSAL MOLD CARRIER
The universal mold carrier
This type of mold carrier is notable for its good operability. The lateral arrangement of the pivot bearing and locking plates provides an optimum amount of space for mounting the mixing head. The presentation function of the upper tool allows you to achieve ideal ergonomics.
The concept
The tools are mounted on clamping platens. The mold carrier is locked in place by pins.
The clamping force and mold carrier functions are performed hydraulically.
The mixing head is mounted permanently to the tool or may be docked in place with a robot.
Features
-
Ease of access to the front and rear of the tool
-
Ease of tool operation due to presentation of the upper tool
-
A high degree of flexibility due to different reaction positions
-
Hydraulic closing stroke – high clamping forces
-
Flexible connection of the mixing head, also through the clamping platen
Specifications
Clamping length min./max. (mm)
1,000/1,500
Clamping depth min./max. (mm)
800/1,200
Opening width min./max. (mm)
100/200
Closing stroke, hydraulic (mm)
100
Clamping force max. (KN)
1,000
Separation force max. (KN)
200
Required hydraulic pressure (bar)
280
Required hydraulic pressure (sec)
11
Tool weight max. (kg)
2,800
Upper tool weight max. (kg)
1,500
Upper tool swivel range (°)
80
Clamping unit swivel range (°)
90
Electronic controller
Siemens Simatic S7
Interface
Profibus/Profinet
Tool presentation (°)
80
Upper tool presentation
Tool functions
Tool replacement system
Docking unit for mixing head
Ejector function
Mixing head tubing on the mold carrier
Technical specifications subject to change.