TRIMMASTER PRESS STEEL
The punch deburring press
With its TRIMMASTER PRESS STEEL, Fill offers a cost-effective solution for the punch-deburring of castings in large batches.
TRIMMASTER PRESS STEEL - Picture 1 from 2
TRIMMASTER PRESS STEEL - Picture 2 from 2
The casting is placed onto the lower part of the tool; this can be carried out manually or by robot. There it is positioned by means of levelling cylinders and an integrated position measuring system.
The hydraulically operated upper part of the tool moves onto the casting, which is fixed in place with the integrated hold-down devices. The cutters on the tool shear off the burrs to be removed from the casting. The casting can now be removed. According to requirements the automatic change of punching tool types can be effected during loading and unloading.
Burre are discharged underneath the deburring press.
As required the TRIMMASTER PRESS STEEL can be operated as a standalone machine or in combination with several machines.
- Short cycle times for the deburring of castings
- Highly cost-effective due to punch-deburring of castings in large batches
- Individual adaption of tools and punch pressure to the properties of the cast part
- High traversing speeds due to speed-regulated hydraulics
- Automatic tool change possible for up to 8 different component types
Castings, forgings (cast stell, gray cast iron, ...), engine blocks, cylinder heads,
chassis components, etc.
Dimensions (length / width / height) (mm)
approx. 3.000/ 3.500/ 4.800 (other dimensions on request)
Clamping surface (mm)
approx. 1.800 x 750 (other dimensions on request)
500 (other stroke dimensions on request)
speed-regulated hydraulics, approx. 15
Punch pressure (t)
60 (others on request
Component take-up (standard and customer specific)
Burr discharging solutions (standard and customer specific)
Tool charger for up to 8 different types
Specifications subject to change.