SWINGMASTER 1500
The decoring machine
The SWINGMASTER 1500 is a unique Fill decoring machine for the automated decoring of heavy and largs castings up to 1.500 kg total weight. The SWINGMASTER 1500 is a machine that operates according to the swing principle for a targeted sand removal process.
The concept
Two extrmely powerful eccentric shafts generate a force in the direction of swing. This causes the casting clamping fixture to start vibrating. Enormous acceleration forces pulverize the crushed sand core inside the casting and transport it out of the cast part.
Acceleration levels of over 150 m/sec² with a 1.500 kg payload (casting plus clamping fixture) guarantee minimum cycle times and the highest levels of cost-effectiveness. In addition to the optimal decoring position, the rapid servo rotating unit moves the cast parts into the best position for transporting the sand away. This ensures the minimum amount of residual sand with the highest degree of process reliability.
The Fill SWINGMASTER 1500 can be operated as a standalone machine with the CORECRACKER hammer module or in combination with several machines and a separat hammering station, as required.
Features
- Maximum decoring output
- Payloads up to 1.500 kg (including clamping fixture)
- Rotation of the casting during core removal
- Component-specific design of the clamping fixture
- Simultaneous decoring of several castings possible
- Robust construction
- Low investment and operating costs
Customer components
castings (light alloys, steel castings, gray cast iron, etc.), engine blocks, chassis components, etc.
Specifications
Max. Payload (kg)
1.500 (clamping device incl. casting)
The clamping device is generally designed as a hydraulic clamping unit
Max. Acceleration (m/sec²)
150 (depending on payload)
approx. 120 (with 1.500 kg payload)
Max. Amplitude (mm)
20 (+/- 10) (depending on payload)
approx. 16 (with 1.500 kg payload)
Max. clamping surface (mm)
1.500 x 2.200 (depending on component center of gravity)
Range of rotation (°)
- 180 to 180 (changes to range of rotation on request)
Connected load (kVA)
41
Total weight (kg)
19.500
clamping fixture (standard and customer specific)
sand removal solutions (standard and customer specific)
CORECRACKER hammer module or external hammer stations
customer-specific automation solutions
Specifications subject to change.
Contact request
More products
