SURFACE SANDING WITH BELT
Surface sanding with belt
This standard machine permits sanding of the ski base from the tip to the tail.
Machine detail
The concept
Run-through procedure
A feed system ensures a fully automated transport of the ski through the entire machine, with the tip pointing forwards.
Features
- Electronic sanding pressure for 5 effective ranges
- General change in the sanding pressure possible in %
- Stepless belt oscillation with contactles belt-edge control
- Stepless belt oscillation with belt-edge control
- Pneumatics + central lubrication built into own medium cabinet
- PLC control with clearly laid out touch operating unit built into the control cabinet
Machining programs
In programs, all important data for the machining of the respective skitype, and the associated sanding parameters are freely configured and stored.
Features
-
High flexibility by a call-up facility of all the important settings for a ski type
-
Optimal sanding performance through optimal coordination of belt speed and sanding pressure
-
Short set-up times since manual change-over to other types, lengths or widths and belt settings is not necessary and all that is needed for a change-over from standard to twin tip skis is a change of program
-
Optimising the sanding belt it can be adjusted to required process quickly and safely using the built-in sander equipment
-
Machine material feeding either manual or fully automatic
-
Wet cell through a partition between processing and drive areas
Specifications
Length/Width (mm)
800 - 2,200 / 60 - 160
Tip height (mm)
12 - 90
Tail height (mm)
Standard, 0 - 80 flexed
Article number
0023-06-08 FSM-ASH-TT-R
Feed drive (kW)
7 x 0.37
Feed speed (m/min)
fixed 10 - 16, stepless adaption
Drive sanding units (kW)
1 x 11
Sanding speed (m/sec)
10 - 25 stepless by program
Sanding belt dimensions (mm)
250 x 3,100
Oscillation
with pneumatic belt edge control, stepless adjustment
Sanding pressure
pneumatic with stepless regulation by program 5 effective ranges,
Input voltage
400 V/50 Hz
Total power consumption (kW)
approx. 18 (without options)
Compressed air
connection 3/4", 6 bar constant
Cooling water
connection 1", pressure 5 bar
Wet extraction
connection Ø 200 mm, v = 3 - 5 m/sec
Control-panel operation
Viewing-window rinsing
Automatic water stop valve
User login with RFID chip
Remote maintenance access
Technical specifications subject to change.
