SIDES MILLING MACHINE

Your solution
Send inquiry

The production machine for rough or finish-milling of the ski sides. Due to a stable swivel bearing and servo motor technology, a dynamic milling pattern can be achieved. 

Do you need assistance?
Wilhelm Rupertsberger Head of Competence Center Plastics
Go to contact page

The concept

Run-through procedure 

A feed system ensures a fully automated transport of the ski through the entire machine, with the tip pointing forwards. 

Features 

  • 2 cutting units with precision cutter spindle and motor drive 
  • Incl. motorized adjustment of the milling depth for constant inlet and outlet of the milling depth 
  • Incl. motorized adjustment of the milling height for repeatable adjustment of the milling pattern height 
  • Incl. motorized adjustment of the milling angle for dynamic repeatable adjustment of the side angle 
  • Solid bearing of the copying roller on both sides  
  • Soundproofed base frame  
  • Latest generation of PLC control with clearly laid out touch operating unit built into the control cabinet 

Features 

  • High flexibility through the calling of all important settings for a ski type at the operating device 

  • The milling performance always remains constant through optimal use of the special milling head and of the scanner and centering system 

  • No set-up times since no manual change-over to other types, lengths or widths is required; Replacement of milling heads with a few turns of the hand 

  • Variable milling pattern due to swiveling milling cutters that give each ski individual side shape (milling heads available as option) Three milling angles and length of zone assigned to each side face (for example, 15°- 5° - 15° possible) 

  • Machine material feeding either manual or fully automatic 

Specifications

Length/Width (mm)

800 - 2,200 / 60 - 160

Tip height (mm)

12 - 90 

Tail heigth (mm)

0 - 90 

Article number

0101-02-01 SFM-SU-SV

Feed drive (kW)

5 x 0.37 

Feed speed (m/min)

fixed 10 - 16, stepless

Drive milling units (kW)

2 x 3,6 stepless

Milling cutter speed (1/min)

4,000 – 12,000 stepless

Milling height (mm)

max. 20 

Input voltage

400 V/50 Hz

Total power consumption (kW)

approx. 10 (without options)

Compressed air

connection 1/2", 6 bar constant

Extraction (mm)

connection 2 x diam. 120

Control station operation

Tools

User login with RFID chip

Remote maintenance connection

Technical specifications subject to change.

Contact request

We would like to put you in touch with a competent contact person for your request. Just a few pieces of information are enough for us to be able to help you in the best possible and timely manner.

Fill Stories