SIDE SANDING MACHINE
Side sanding with 2 sanding pads
Sanding machine for the efficient processing of side edges. The ski runs through the machine horizontally, with either the tip or the tail pointing forwards
Machine detail
The concept
Run-through procedure
A feed system ensures a fully automated transport of the ski through the entire machine, with either the tip or the tail pointing forwards
Features
- Electronic sanding pressure for 5 effective ranges
- Special carbide sanding shoes for long stable sanding result
- Angle adjustment on all aggregates stepless 0 - 6
- General sanding pressure change in % quickly possible
- Latest Generation of a PLC control with clearly laid out operating unit built into the control cabinet
Machining program
In programs, all important data for the machining of the respective type of ski, and the associated grinding parameters are freely configured and stored.
Features
-
High flexibility through use as a pre-sanding, finish-sanding or scotching machine
-
Optimal sanding performance by matching sanding belts, sanding speed and sanding pressure
-
Short set-up times, as no manual changeovers to other ski types, lengths or widths are necessary
-
Machine material feeding either manual or fully automatic
-
Optimization of the sanding belt by fast and safe adjustment to the required processing with built-in belt dressing device.
-
Uniform abrasive belt wear due to new oscillation control by means of servo motors.
Specifications
Length/Width (mm)
800 - 2,200 / 60 - 160
Tip height (mm)
12 - 90
Tail height (mm)
0 - 90
Article number
0022-01-01 SSM-A-S2
Drive feed top/bottom (kW)
4 x 0.37 / 1 x 0.37
Feed speed (m/min)
10 – 16 stepless adjustment
Drive sanding aggregat (kW)
2 x 4.0 steples adjustment
Sanding speed (m/sec)
12 – 25 stepless via the program
Sanding belt dimensions (mm)
100 x 2,000 or 120 x 2,100 possible
Oscillation
stepless adjustment
Input voltage
400 V/50 Hz
Total power consumption (kW)
approx. 13 (without options)
Compressed air
connection 3/4", 6 bar constant
Cooling water
connection 1", pressure 5 bar
Cooling water outlet (mm)
width 220, outlet height 540
Wet extraction
connection diam. 200 mm, v = 3 – 5 m/sec
Motor-driven angle adjustment
Control-panel operation
Automatic water stop valve
User login with RFID chip
Remote maintenance connection
Technical specifications subject to change.
