CLEANING AND DRYING MACHINE

Your solution
Send inquiry

Machine for cleaning and drying the ski in a run-through process. The ski is cleaned and dried before and after a series of different processes in a highly efficient manner. 

Do you need assistance?
Wilhelm Rupertsberger Head of Competence Center Plastics
Go to contact page

The concept

Run-through procedure 

A feed system ensures a fully automated transport of the ski through the machine, with either the tip pointing or the tail pointing forwards. 

Features 

  • Base frame with sound insulation 
  • Feed system with transport rollers 
  • Drying unit with pressure fan, heating unit and adjustable jets 
  • Drying temperature can be set by a thermostat 
  • Controls built into the cabinet 

Features 

  • No change-over required, since all standard ski types can be passed through with no need for manual changes; especially well suited for 3D surfaces 

  • Effective ski wetting with water spraying nozzles 

  • Improved drying performance with air nozzles built up around the ski 

  • Low heat loss as a result of the good insulation properties of the external surfaces 

  • Short heating up time through a controlled heating facility, saving of energy by self-heating by means and self-compression 

  • Machine material feeding either manual or fully automatic 

Specifications

Length/Width (mm)

800 – 2,200 / 60 - 160

Tip height (mm)

12 - 90 

Tails (mm)

0 - 90 

Article number

0025-05 RTA-H-SKI

Feed drive (kW)

1 x 0.55 

Feed speed (m/min)

fixed 15, optionally: stepless

Drive drying unit (kW)

2 x 11 

Heating (kW)

2 x 6/9 

Drying temperature

adjustable

Input voltage

400 V/50 Hz

Total power consumption (kW)

approx. 43 (without options)

Fresh water

connection 1/2", pressure 5 bar

Cooling water outlet (mm)

Ø 60 

Wet extraction at the roof (mm)

connection diam. 100

Brushing unit top + bottom

Automatic water stop valve

Technical specifications subject to change. 

Contact request

We would like to put you in touch with a competent contact person for your request. Just a few pieces of information are enough for us to be able to help you in the best possible and timely manner.

Fill Stories