DEUTSCH   |   HOME  |  CONTACT FORM  |  IMPRESSUM  |  PRESS  |  SITEMAP  |  LOGIN
facebook twitter linkedin instagram pinterest blogspot youtube xing wikipedia karriere.at
< back AUTOMOTIVE / METAL MACHINING / STANDARD PROCESSING MACHINES / SYNCROMILL F
Detail syncromill f42-100

SYNCROMILL F42-100

YOUR BENEFITS

  • Highly cost-effective thanks to large machining capacity
  • Up to 4 spindles in operation at any one time
  • Short tool changeover times thanks to quick-change system
  • Loading and unloading with zero cycle-time impact
  • Optimal accessibility (ergonomics)
  • Small footprint
  • Automatic part removal
  • Optimal swarf removal
  • Specific tool clamping technology

 

PRODUCTS

Door hinges, car/truck connecting rods, brake calipers, stub axles, hydraulic components, rocker arms, exhaust manifolds, brake holders

THE PRINCIPLE

Two clamping fixtures are rotated alternately by means of a rotary table into the machining area. Here the workpieces are machined with a compact, dynamic, multi-spindle machining unit. The workpiece is moved in the Y direction; the tool spindles in X and Z directions.

 

This setup gives rise to the enormous stiffness of the machine. As well as short chip-to-chip times, the tool magazine positioned above the processing unit also enables tool loading during machining operation.

The syncromill f42-100 can be interlinked with upstream or downstream processes and adapted to meet specific customer requirements.

TECHNICAL DATA

OPERATING RANGES
Travel X/Y/Z (mm)400/690/565
FEED AXES
Speed X/Y/Z (m/min)45/45/60
Acceleration X/Y/Z (m/s²)12/10/12
MACHINING SPINDLES
Number of spindles4
Spindle spacing (mm)260
Power S1/100% (kW)20
Torque S1/100% (Nm)262
Power S6/40% (kW)26
Torque S6/40% (Nm)340
Max. speed (rpm)10,000
TOOL INTERFACEHSK 100
TOOL MAGAZINE
Chip-to-chip time (VDI 2852 t2) (sec)4.8
Tool positions4 x 12
Tool length (mm)275
Weight (kg)15
Diameter (mm)125
Diameter with empty position (mm)200
CONTROLLER840D sl
INSTALLATION
Rated output (kVA)160
Installation dimensions L/W/H (m)5.8/2.9/4.1
Weight (kg)25,000
OPTIONS
A-axis (°)+/- 180
B-axisnot available
Cooling medium MQLavailable
Cooling medium Emulsionavailable
Tool magazine positions 4 x 14
Top loading bulkhead (portal loading)available

Specifications subject to change